Workplace dust and fume extraction solutions
 

Extraction Hoses

We have a vast collection of multi-purpose hoses to ensure we offer a solution for different requirements such as welding, dust, exhaust fume, and chip extraction.

Ventilation hoses for:

  • Welding smoke extraction

  • Dust extraction

  • Exhaust fume extraction

  • Chip extraction

  • Hot air extraction

Hose S1

Flexible hose with great wear, built of several layers, consisting of copolymer, aluminium and polyester. Suitable for transport of extraction air without wearing particles, e.g. welding smoke in connection with extraction arms.

Hose S1A

Hardly ignitable hose that is used for all forms of ventilation, among these vacuum-cleaning, light chips, smoke and gases. Hose made of PVC with steel spiral.

Hose S2A

Extruded hose built on ethyl-vinyl-acetate (EVA). Corrugated in- and outside. Made with self-supporting to make spiral superfluous to achieve full cross section. High vacuum hose for welding smoke, soldering smoke and grinding dust.

Hose S2B

Sandwich-built hose with filler of yarns to provide good tensile strength and flexibility. Smooth outside, extruded inside. Of 2 layer PVC and with steel spiral. Extraction of cold air, flue gases, dust and lighter particles. Suitable for industrial vacuum cleaning.

Hose S3B

Flexible heat resistant thermoplastic hose with outside nylon spiral. Hose can partly run over and is very light and is ideal for exhaust fume extraction. Suitable for exhaust fumes, hot and oil-bearing air. Suitable for hose reels.

Hose S3C

Flexible heat resistant rubber-impregnated hose with outside nylon-lined rubber spiral. Hose can be run over and is light and is ideal for exhaust fume extraction. Suitable for exhaust fumes, hot and oil-bearing air. Suitable for hose reels.

Hose S4

Very flexible, atoxic polyurethane hose produced of one layer polyurethane wall with encapsulated copper-coloured spring steel spiral. High temperature hose suitable for extraction of welding smoke with sparks, grinding smoke with sparks and extraction from laser and exhaust fumes. Approved as very flame retardant according to 4102-B1.

Hose S4A

Transparent polyester polyurethane. Weld-in copper-coloured spring steel spiral. Flexible extraction hose for chip extraction and material transport. Hose is very hard-wearing and has large tensile strength. Is very resistant towards oil and petrol and is atoxic; therefore also suitable for food. Suitable for use for suspended valves.

Hose S6

Special coated high temperature loom with galvanised steel spiral with hard wearing protection in red plastic. Exhaust hose for e.g. hose reels.

Hose S7

Flexible and light hose of 2-layer heat resistant glass cloth with spring steel spiral outside. High temperature hose suitable for extraction of welding smoke with sparks, grinding dust with sparks, laser and exhaust fume extraction.

Hose S8

Partly flexible hose of 2-layer heat-resistant cloth with external spring spiral. High temperature hose suitable for exhaust extraction. Suitable for use of the first metres after exhaust fume extraction. Approved as very flame-retardant according to 4102-B1.

Hose S9-A

Anti-static extraction hose for use in explosion dangerous areas in electrically conductive plyethylene and with spiral in spring steel wire. Flow resistance and surface resistance <10³ ohm. Conforms to ATEX directive.

Hose Clamp

9mm zinc plated steel.

Easyclip

Band of stainless 17% chromium steel with safety lock. Band width: 9mm.

Protection sleeve for hose clamps